56K PCI Faxmodem Quick Installation Guide Guide d'installation rapide Installationsanleitung Guida per l'installazione rapida Guía breve de instalación Manual de Instalação Rápida #R24.0572.00 rev 1 11/05 56K PCI Faxmodem Quick Installation Guide Guide d'installation rapide Installationsanleitung Guida per l'installazione rapida Beknopteinstallatiegids Guía breve de instalación Manual de Instalação Rápida U.S. Robotics Corporation 935 National Parkway Schaumburg, Illinois 60173-5157 USA No part of this documentation may be reproduced in any form or by any means or used to make any derivative work (such as a translation, transformation, or adaptation) without written permission from U.S. Robotics Corporation. U.S. Robotics Corporation reserves the right to revise this documentation ad to make changes in the products and/or content of this document from time to time without obligation to provide notification of such revision or change. U.S. Robotics Corporation provides this documentation without warranty of any kind, either implied or expressed, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose. If there is any software on removable media described in this documentation, it is furnished under a license agreement included with the product as a separate document, in the hard copy documentation, or on the removable media in a directory named LICENSE. If you are unable to locate a copy, please contact USRobotics and a copy will be provided to you. UNITED STATES GOVERNMENT LEGEND If you are a United States government agency, then this documentation and the software described herein are provided to you subject to the following: All technical data and computer software are commercial in nature and developed solely at private expense. Software is delivered as "Commercial Computer Software" as defined in DFARS 252.227-7014 (June 1995) or as a "commercial item" as defined in FAR 2.101(a) and as such is provided with only such rights as are provided in USRobotics standard commercial license for the Software. Technical data is provided with limited rights only as provided in DFAR 252.227-7015 (Nov 1995) or FAR 52.227-14 (June 1987) whichever is applicable. You agree not to remove or deface any portion of any legend provided on any licensed program or documentation contained in, or delivered to you in conjunction with, this Administrator Guide. Copyright © 2005 U.S. Robotics Corporation. All rights reserved. U.S. Robotics and the USRobotics logo are registered trademarks of U.S. Robotics Corporation. Other product names are for identification purposes only and may be trademarks of their respective companies. Product specifications subject to change without notice. Contents English Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Instructions d'installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Deutschsprachige Installationsanleitung . . . . . . . . . . . . . . . . . . . . . . . . . 25 Istruzioni di installazione in italiano . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Instrucciones de instalación. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Instruções de Instalação em Português . . . . . . . . . . . . . . . . . . . . . . . . . . 61 1 2 English Installation Instructions Prepare for installation. CAUTION: To avoid the risk of electrical shock, make sure your computer and all peripheral devices are turned off and unplugged. Disconnect all telephone cables from any existing modems before opening the computer's cover. Touch an unpainted metal area of your computer's case to ground yourself, which protects your equipment from electrostatic discharge. NOTE: USRobotics recommends uninstalling any other modems that are installed in your system and unplugging all telephone cords connected to these modems. Refer to your previous modem's documentation for instructions. Write your new USRobotics modem's serial number in the box below. The serial number is located on the white bar code sticker on the modem and on the modem's box. If you ever need to call our Technical Support department, you will need this number and your Model Number to receive assistance. Model Number 5671 Serial Number Install the Modem. Step 1: Physically install the modem in your computer. Turn off your computer and all peripheral devices. Unplug your computer and remove the computer's cover. Remove the expansion slot cover at the back of an empty PCI expansion slot. PCI slots are usually white in color. The slot cover is on the back of your computer and covers an opening on your computer's case. The slot cover could be held in place with a screw or a clip. Insert the modem into the PCI slot. You may need to rock the modem back and forth while pressing down firmly to properly seat the modem in the PCI slot. The modem's metal bracket will cover the opening on the back of the computer. If applicable, secure the modem with the screw or clip you removed. Replace the computer's cover. 1 Step 2: Connect the modem to an analogue phone line. Plug one end of the provided phone cord into the jack on the modem labeled other end into an analogue phone wall jack. . Plug the CAUTION: The USRobotics 56K PCI Faxmodem requires a standard analogue telephone line. Do not connect your modem to a digital telephone line. Digital lines are commonly used in office buildings and hotels. If you are unsure whether your line is analogue or digital, ask your network administrator or your local telephone company. Step 3: Install the modem drivers. Driver installation varies by operating system. Follow the instructions below for your version of Windows. Windows XP NOTE: If at any time during the installation you are prompted to select the location of your installation drivers, select the following location on the Installation CD-ROM (assuming D: is your CD-ROM drive): D:\2000_XP 1. 2. 3. 4. 5. 6. Reconnect your computer and peripherals and turn your computer on. Log into Windows. When the Found New Hardware Wizard appears, select No, not this time and click Next. Insert the Installation CD-ROM into your CD-ROM drive. When a Hardware Installation warning appears, click Continue Anyway*. When Windows is finished installing the drivers, click Finish. Windows Me NOTE: If at any time during the installation you are prompted to select the location of your installation drivers, select the following location on the Installation CD-ROM (assuming D: is your CD-ROM drive): D:\ 1. 2. 3. 4. Reconnect your computer and peripherals and turn your computer on. Log into Windows. When the Add New Hardware Wizard appears, insert the Installation CD-ROM into your CD-ROM drive. Install the U.S. Robotics V.92 PCI Modem Enumerator as follows: A. Select Automatic search for a better driver (Recommended) and click Next. USRobotics has thoroughly tested in conjunction with the supported hardware and has verified compatibility with Windows XP and 2000. * 2 B. 5. When the wizard is finished installing the drivers, click Finish. The wizard then begins a search for drivers for the U.S. Robotics V.92 PCI Modem. Install the U.S. Robotics V.92 PCI Modem as follows. A. Verify that Automatic search for a better driver (Recommended) is selected and click Next. B. When Windows is finished installing the drivers, click Finish. Windows 2000 NOTE: If at any time during the installation you are prompted to select the location of your installation drivers, select the following location on the Installation CD-ROM (assuming D: is your CD-ROM drive): D:\2000_XP 1. 2. 3. 4. 5. 6. Reconnect your computer and peripherals and turn your computer on. Log into Windows. When the Found New Hardware Wizard appears, click Next, then insert the Installation CD-ROM into your CD-ROM drive. Select Search for a suitable driver for my device (Recommended) and click Next. Select CD-ROM drives and click Next. When Windows locates the correct drivers for the PCI Simple Communications Controller, click Next. If a "Digital Signature Not Found" screen appears, click Yes to continue.** 7. When Windows is finished installing the drivers, click Finish. Windows 98 NOTE: If at any time during the installation you are prompted to select the location of your installation drivers, select the following location on the Installation CD-ROM (assuming D: is your CD-ROM drive): D:\ 1. 2. 3. 4. Reconnect your computer and peripherals and turn your computer on. Log into Windows. When the Add New Hardware Wizard appears, insert the Installation CD-ROM into your CD-ROM drive and click Next. Install the U.S. Robotics V.92 PCI Modem Enumerator as follows: A. Select Search for the best driver for your device (Recommended) and click Next. B. Select CD-ROM and click Next. C. When the wizard locates the correct drivers for the U.S. Robotics V.92 PCI Modem Enumerator, click Next. D. When the wizard is finished installing the drivers, click Finish. ** USRobotics has thoroughly tested in conjunction with the supported hardware and has verified compatibility with Windows XP and 2000. 3 The wizard then begins a search for drivers for the U.S. Robotics V.92 PCI Modem. 5. Install the U.S. Robotics V.92 PCI Modem as follows. A. Click Next. B. Select Search for the best driver for your device (Recommended) and click Next. C. Select CD-ROM and click Next. D. When Windows locates the correct drivers for the U.S. Robotics V.92 PCI Modem, click Next. E. When Windows is finished installing the drivers, click Finish. Windows 95 NOTE: If at any time during the installation you are prompted to select the location of your installation drivers, select the following location on the Installation CD-ROM (assuming D: is your CD-ROM drive): D:\ 1. 2. Reconnect your computer and peripherals and turn your computer on. Insert the Installation CD-ROM into your CD-ROM drive before Windows opens. You need to install both the U.S. Robotics V.92 PCI Modem Enumerator and the U.S. Robotics V.92 PCI Modem. When the New Hardware Found or Update Device Driver Wizard appears, follow the onscreen instructions. 3. Install the Software. Insert the Installation CD-ROM into your CD-ROM drive. The Installation CD-ROM window should automatically appear. If your Installation CD-ROM is already in the drive, and the Installation CD-ROM interface is not displayed, eject and reinsert the Installation CD-ROM. If the CD-ROM interface still does not appear, click Windows Start and then Run. Type D:\setup.exe in the "Run" dialog box. (If your CD-ROM drive uses a different letter, type that letter in place of "D.") Install the Instant Update software. The Instant Update software automatically notifies you of any updates to your modem's code. To Install the Instant Update Software: 1. 2. 3. At the Installation CD-ROM interface, click Software. Select Instant Update and click Install. Follow the on-screen instructions to install the Instant Update software. Install the Internet Call Notification software. Internet Call Notification enables the V.92 feature, "Modem On Hold," which allows you to suspend your Internet connection when there is an inbound telephone call. If you are connecting to a service provider that supports V.92, you will receive a message informing you of 4 an incoming call. In addition, if you subscribe to Caller ID service, the number of the incoming call will be displayed in the computer's message window. You will then have the option to accept the call or to ignore it. If you choose to accept the call, another message will appear notifying you of the length of time that the provider's system will wait on hold before the data connection is terminated. You can then return to the connection when the call is completed without losing the connection. If you are connecting to a service provider that does not support V.92, you will receive a message informing you of an incoming call. You will then have the option to accept the call or to ignore it. If you choose to accept the call, your data connection will be terminated. To Install the Internet Call Notification software: 1. 2. 3. At the Installation CD-ROM interface, click Software. Select USRobotics Internet Call Notification and click Install. Follow the on-screen instructions to complete the installation of the software. Register your modem. When you register your modem online, USRobotics will use your information to: · Inform you of future product support notices, alerts, and changes to our support offerings. · Invite you to participate in market research, new product definition studies, and beta test programs. · Invite you to participate in promotional campaigns. We respect our customers' privacy. USRobotics will not sell or provide any personal information that identifies you or any individual to any outside source. To register your modem: 1. 2. 3. Connect to your Internet service p ...