2-348-403-61 (1) FM/AM Compact Disc Player Autoestéreo para disco compacto Operating Instructions Manual de instrucciones GB ES CT For installation and connections, see the supplied installation/connections manual. Para obtener información sobre la instalación y las conexiones, consulte el manual de instalación/conexiones suministrado. CDX-S2010X CDX-S2010C © 2005 Sony Corporation CDX-S2010T Welcome ! Thank you for purchasing this Sony Compact Disc Player. You can enjoy your drive with the following functions. · CD playback: You can play CD-DA and CD-R/CD-RW for audio use. · Radio reception: ­ You can store up to 6 stations per band (FM1, FM2, FM3, AM1 and AM2). ­ BTM (Best Tuning Memory) function: the unit selects strong signal stations and stores them. Warning if your car's ignition has no ACC position After turning the ignition off, be sure to press and hold (OFF) on the unit until the display disappears. Otherwise, the display does not turn off and this causes battery drain. This label is located on the bottom of the chassis. CAUTION The use of optical instruments with this product will increase eye hazard. 2 Table of Contents Getting Started Resetting the unit . . . . . . . . . . . . . . . . . . . . . . . . 4 Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . 4 DEMO mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Detaching the front panel . . . . . . . . . . . . . . . . . 4 Attaching the front panel . . . . . . . . . . . . . . . 4 Other functions Changing the sound settings . . . . . . . . . . . . . . . Adjusting the sound characteristics -- BAL/FAD/SUB . . . . . . . . . . . . . . . . . . . Adjusting the equalizer curve -- EQ3 . . . . Adjusting setup items -- SET . . . . . . . . . . . . . Using optional remote commanders . . . . . . . . . Card remote commander RM-X114 . . . . . . Rotary commander RM-X4S . . . . . . . . . . . 6 6 6 7 7 7 8 Location of controls and basic operations Main unit . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Additional Information Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Notes on discs . . . . . . . . . . . . . . . . . . . . . . . 9 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Removing the unit. . . . . . . . . . . . . . . . . . . . . . 10 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 10 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . 11 Error displays/Messages . . . . . . . . . . . . . . 12 Radio Storing and receiving stations . . . . . . . . . . . . . . 6 Storing automatically -- BTM . . . . . . . . . . 6 Storing manually . . . . . . . . . . . . . . . . . . . . . 6 Receiving the stored stations . . . . . . . . . . . . 6 Tuning automatically . . . . . . . . . . . . . . . . . . 6 3 Getting Started Detaching the front panel You can detach the front panel of this unit to prevent theft. Resetting the unit Before operating the unit for the first time, or after replacing the car battery or changing the connections, you must reset the unit. Detach the front panel and press the RESET button with a pointed object, such as a ballpoint pen. Caution alarm If you turn the ignition switch to the OFF position without detaching the front panel, the caution alarm will sound for a few seconds. The alarm will only sound if the built-in amplifier is used. RESET button Note Pressing the RESET button will erase the clock setting and some stored contents. 1 2 Press (OFF). The unit is turned off. Press , then pull it off towards you. Setting the clock The clock uses a 12-hour digital indication. (OFF) 1 2 3 4 5 6 Press and hold (SEL). The setup display appears. Press (SEL) repeatedly until "CLOCKADJ" appears. Press (DSPL). The hour indication flashes. Press the volume +/­ button to set the hour and minute. To move the digital indication, press (DSPL). Press (SEL). The clock starts and the next setup display appears. Press and hold (SEL). The setup is complete. Notes · Do not drop or put excessive pressure on the front panel and display window. · Do not subject the front panel to heat/high temperature or moisture. Avoid leaving it in a parked car or on a dashboard/rear tray. Tip When carrying the front panel, use the supplied front panel case. Attaching the front panel Engage part A of the front panel with part B of the unit, as illustrated, and push the left side into position until it clicks. To display the clock, press (DSPL). Press (DSPL) again to return to the previous display. With the card remote commander In step 2 and 4, to select the item or setting, press M or m. In step 4, to move the digital indication, press < or ,. DEMO mode When the unit is turned off, the clock is displayed first, then demonstration (DEMO) mode starts the demonstration display. To cancel the DEMO mode, set "DEMO-OFF" in setup (page 7) while unit is turned off. A B Note Do not put anything on the inner surface of the front panel. 4 Location of controls and basic operations Main unit 1 2 34 SEL 5 6 789 0 SOURCE MODE ATT EQ3 SEEK DIM REP SHUF DSPL SENS 1 2 3 4 5 6 BTM OFF qa qs qd qf qg qh qj qk CDX-S2010X CDX-S2010T CDX-S2010C ql Refer to the pages listed for details. a Volume +/­ button To adjust volume. b SEL (select) button 4, 6, 7 To select items. c SOURCE button To power on/change the source (Radio/CD). d MODE button 6 To select the radio band (FM/AM). e Disc slot Insert the disc (label side up), playback starts. f Display window g ATT (attenuate) button To attenuate the sound. To cancel, press again. h EQ3 (equalizer) button 6 To select an equalizer type (XPLOD, VOCAL, CLUB, JAZZ, NEW AGE, ROCK, CUSTOM or OFF). i Z (eject) button To eject the disc. j SEEK +/­ button Radio: To tune in stations automatically (press); find a station manually (press and hold). CD: To skip tracks (press); fast-forward/reverse a track (press and hold). k (front panel release) button 4 l DSPL (display)/DIM (dimmer) button 4 To change display items (press); change the display brightness (press and hold). m SENS button To improve weak reception: LOCAL/ MONO. n RESET button (located behind the front panel) 4 o Frequency select switch (located on the bottom of the unit) See "Frequency select switch" in the supplied installation/connections manual. p Number buttons Radio: To receive stored stations (press); store stations (press and hold). CD: (3): REP To play the current track/disc repeatedly. (4): SHUF To play the tracks in random order. q BTM button 6 To start the BTM function (press and hold). r OFF button To power off/stop the source. s Receptor for the card remote commander 7 5 Radio Other functions Storing and receiving stations Caution When tuning in stations while driving, use Best Tuning Memory (BTM) to prevent an accident. Changing the sound settings Adjusting the sound characteristics -- BAL/FAD/SUB You can adjust the balance, fader and subwoofer volume. Storing automatically -- BTM 1 Press (SOURCE) repeatedly until "TUNER" appears. To change the band, press (MODE) repeatedly. You can select from FM1, FM2, FM3, AM1 or AM2. Press and hold (BTM) until "BTM" flashes. The unit stores stations in order of frequency on the number buttons. A beep sounds when the setting is stored. 1 Press (SEL) repeatedly until "BAL," "FAD" or "SUB" appears. The item changes as follows: LOW*1 t MID*1 t HI*1 t BAL (left-right) t FAD (front-rear) t SUB (subwoofer volume)*2 *1 When EQ3 is activated (page 6). *2 When the audio output is set to "SUB" (page 7). "ATT" is displayed at the lowest setting, and can be adjusted up to 20 steps. 2 2 Storing manually 1 While receiving the station that you want to store, press and hold a number button ((1) to (6)) until "MEM" appears. The number button indication appears in the display. Press the volume +/­ button repeatedly to adjust the selected item. After 3 seconds, the setting is complete and the display returns to normal play/reception mode. Note Adjust within 3 seconds of selecting the item. With the card remote commander In step 2, to adjust the selected item, press <, M, , or m. Note If you try to store another station on the same number button, the previous stored station will be replaced. Adjusting the equalizer curve -- EQ3 You can adjust and store the equalizer settings for different tone ranges. Receiving the stored stations 1 Select the band, then press a number button ((1) to (6)). 1 2 3 Select a source, then press (EQ3) repeatedly to select the EQ3 type. Press (SEL) repeatedly until "LOW," "MID" or "HI" appears. Press the volume +/­ button repeatedly to adjust the selected item. The volume level is adjustable in 1 dB steps, from ­10 dB to +10 dB. With the card remote commander To select preset stations, press M or m. Tuning automatically 1 Select the band, then press (SEEK) +/­ to search for the station. Scanning stops when the unit receives a station. Repeat this procedure until the desired station is received. 6 Tip If you know the frequency of the station you want to listen to, press and hold (SEEK) +/­ to locate the approximate frequency, then press (SEEK) +/­ repeatedly to fine adjust to the desired frequency (manual tuning). Repeat steps 2 and 3 to adjust the equalizer curve. To restore the factory-set equalizer curve, press and hold (SEL) before the setting is complete. After 3 seconds, the setting is complete and the display returns to normal play/reception mode. With the card remote commander In step 3, to adjust the selected item, press <, M, , or m. Using optional remote commanders Card remote commander RM-X114 Location of controls The corresponding buttons on the card remote commander control the same functions as those on this unit. Adjusting setup items -- SET 1 2 3 4 Press and hold (SEL). The setup display appears. Press (SEL) repeatedly until the desired item appears. Press the volume +/­ button to select the setting (example "ON" or "OFF"). Press and hold (SEL). The setup is complete and the display returns to normal play/reception mode. DSPL MENU* SOURCE