Sagem_Fax_ATA101S.book Page 1 Jeudi, 21. février 2008 5:09 17 SAGEM FAX ATA 101S User guide Livret utilisateur Benutzerhandbuch Manuale d'uso Guía del usuario Manual do utilizador Sagem_Fax_ATA101S.book Page 2 Jeudi, 21. février 2008 5:09 17 Sagem_Fax_ATA101S.book Page I Jeudi, 21. février 2008 5:09 17 CONTENT What is an ATA (Analog Telephone Adapter)? ..........1 Recommendations and factory settings .....................1 The contents of your box .............................................2 Connections ..................................................................2 Installation and manual setup (via the Web setup interface) .............................................................3 Accessing the Web setup interface ....................................... 3 Manual setup of the Sagem Fax ATA 101S .......................... 4 Automatic installation and setup (via TFTP) ..............8 Installing the TFTP server ...................................................... 8 Creating CLI command files .................................................. 8 Loading files from the TFTP server .................................... 10 Glossary .......................................................................11 Safety Instructions ......................................................12 Electrical Supply .................................................................. 12 Operator Accessible Areas .................................................. 13 Maintenance ........................................................................ 13 Cleaning Your product ......................................................... 13 Operational Safety Information ............................................ 14 Maintenance Information ..................................................... 14 Recommendations ......................................................15 General Information ............................................................. 15 Declaration of conformity ..................................................... 15 Environment ......................................................................... 16 Trademarks .......................................................................... 17 Customer Information .................................................17 Guarantee ....................................................................18 User guide I ENG Sagem_Fax_ATA101S.book Page II Jeudi, 21. février 2008 5:09 17 II Sagem Fax ATA 101S Sagem_Fax_ATA101S.book Page 1 Jeudi, 21. février 2008 5:09 17 USER GUIDE WHAT IS AN ATA (ANALOG TELEPHONE ADAPTER)? The Sagem Fax ATA 101S is a voice over IP gateway allowing you to connect analog terminals (fax machine, telephone, etc.) to a voice over IP infrastructure (IP operator, IPPBX or VoIP gateway). Through the Sagem Fax ATA 101S, you can continue to use your analog telecommunications peripherals via your voice over IP telephone architecture. RECOMMENDATIONS AND FACTORY SETTINGS Make sure to reserve an IP bandwidth sufficient to provide transmission quality. The bandwidth to be reserved depends on the codec you use: · G711: 64 Kbps · G729: 8 Kbps · T.38: up to 14.4Kbps The default network data of the setup Ethernet port (LAN port) are as follows: · IP address: 192.168.134.1 · Sub-network mask: 255.255.255.0 · User name: user · Password: user Important The Sagem Fax ATA 101S has two Ethernet ports (RJ45): · LAN provides access to the unit's setup via the manual setup method (see "See Installation and manual setup (via the Web setup interface)", page 3). · WAN provides access to the unit's automatic setup (see "See Automatic installation and setup (via TFTP)", page 8) and allows the unit to be connected to an IPBX, a VoIP gateway or an IP operator. User guide 1 ENG Sagem_Fax_ATA101S.book Page 2 Jeudi, 21. février 2008 5:09 17 THE CONTENTS OF YOUR BOX · this user guide · 1 Sagem Fax ATA 101S · 1 power supply unit CAUTION! Only use the electrical power supply provided with the product. Using an unauthorised power supply may damage the device. CONNECTIONS 1 2 3 4 Only use the electrical power supply provided with the product. Using an unauthorised power supply may damage the device. Electrical power supply part number: Europe: KSAD1200150W1EU A - NETBIT UK: KSAD1200150W1UK A - NETBIT USA/Canada: KSAD1200150W1US - Ktec 1 2 - LINE 3 - WAN 4 - LAN Power supply unit. Connection socket for analog (telephone, fax machine, etc.). terminal Connection socket for switch, router or modem. Connection socket for PC. Only used for device setup. Warning: For Line, WLAN and LAN interfaces, do not connect cable that go outside of the building. 2 Sagem Fax ATA 101S Sagem_Fax_ATA101S.book Page 3 Jeudi, 21. février 2008 5:09 17 INSTALLATION AND MANUAL SETUP (VIA THE WEB SETUP When you do not have many units to set up, it is recommended to set up the ATA through the Web interface. This setup mode allows you to set up your Sagem Fax ATA 101S simply and quickly. Note This method is recommended when installing and setting up 1 to 10 units. Accessing the Web setup interface 1. Connect the LAN RJ45 connector located at the rear of the unit directly to your computer via a crossed cable, or to a Hub/Switch via a straight cable. Important Make sure to use a Hub/Switch that is not connected to your computer network. This will avoid any IP address conflicts. 2. Set up your network card so that it is located in the same IP network as the LAN connection socket of your Sagem Fax ATA 101S. You can use the following default IP settings: · IP address: 192.168.134.10 · Sub-network mask: 255.255.255.0 · Default gateway: blank User guide 3 ENG INTERFACE) Sagem_Fax_ATA101S.book Page 4 Jeudi, 21. février 2008 5:09 17 3. Access the setup interface of your Sagem Fax ATA 101S using your Internet browser by entering the address http:// 192.168.134.1, then enter the required access codes. You can use the following default access codes: · User name: user · Password: user You can then assign an IP address (fixed or dynamic via a DHCP server) to the Sagem Fax ATA 101S WAN port via the Web setup interface. Manual setup of the Sagem Fax ATA 101S Step 1 - Basic > LAN/WAN Setup menu eth0 setting These settings do not need to be changed as they are the settings of the Sagem Fax ATA 101S "LAN" interface, i.e. the interface that allows you to access the ATA unit setup interface. 4 Sagem Fax ATA 101S Sagem_Fax_ATA101S.book Page 5 Jeudi, 21. février 2008 5:09 17 vif0 setting This setting allows you to assign an IP address to the WAN interface of your Sagem Fax ATA 101S so that you can connect it to your computer network, or more specifically to your VoIP architecture. 1. Check Select on the line corresponding to vif0. 2. Click on Configure interface. 3. Two options are then proposed: · Dynamic IP address from DHCP server: select this mode if you want your network's DHCP server to automatically assign an IP address to the WAN interface of your Sagem Fax ATA 101S (this option is activated by default). · Static IP address: select this mode if you want to manually define the fixed IP address of the WAN interface of your Sagem Fax ATA 101S. Step 2 - VoIP > SIP Configuration > SIP general > proxy configuration menu If you use a proxy for SIP authentication and call routing: 1. Check the Use proxy box. 2. According to the recommendations of your SIP provider or your VoIP administrator, fill in the Outbound proxy, Registar proxy and SIP domain fields. User guide 5 ENG Sagem_Fax_ATA101S.book Page 6 Jeudi, 21. février 2008 5:09 17 Step 3 - SIP Configuration > SIP general > Tel to IP routing table menu If you do not use a proxy, you can set up the routing tables via this menu. The routing tables of the Sagem Fax ATA 101S allow you to create a routing of type "Tel to IP". Route the call coming from the analog terminal connected to the Sagem Fax ATA 101S to a specific IP terminal (IPBX, VoIP gateway, IP telephone, IP fax machine, etc.) according to the dialled number prefix. 1. To create a routing table click on Add. The following window is displayed: 1. In the Speed dial field, enter the code used to detect the routing table to be used when the user dials a number starting with this code. This code can contain one to three digits. 2. In the User name and IPv4 addr fields, enter the information relating to the VoIP peripheral to which the call is to be routed. You can also define the communication port (the ATA default port proposed is the port normally used by the SIP protocol). 3. To validate, click on Add. The new routing rule is then created. 6 Sagem Fax ATA 101S Sagem_Fax_ATA101S.book Page 7 Jeudi, 21. février 2008 5:09 17 Step 4 - SIP Configuration > SIP Phone menu The User name and Display Name settings must always be entered, whether you use a SIP proxy or not. The Auth. user name and Auth. password settings should be entered if you connect the ATA to a SIP proxy requiring authentication. In all cases, the information communicated by the network administrator must be entered. The Preferred codec setting lets you choose the codec to be used to compress voice. Your infrastructure must support at least one of the following codecs: · G711 PCMA · G711 PCMU · G729 The Fax Mode setting lets you choose your fax transfer mode. You can choose between two technologies: Note You must define the technology supported by your VoIP infrastructure. In doubt, choose the T.38 option. · Fax pass-through (only via the G.711 encoder): in this mode, the VoIP infrastructure considers a fax to be an ordinary voice call. User guide 7 ENG Sagem_Fax_ATA101S.book Page 8 Jeudi, 21. février 2008 5:09 17 · T.38: in this mode which is specifically adapted for fax transfers, the signals are demodulated and their digital data are encapsulated in IP packets. This mode increases reliability and considerably lowers bandwidth needs compared with the "pass through" mode. The Sagem Fax ATA 101S can support DTMF recognition, call transfer, putting on hold, VAD, etc. If need be, you can contact our support department "See Customer Information", page 17). AUTOMATIC INSTALLATION AND SETUP (VIA TFTP) To administer a large number of Sagem Fax ATA 101S, it is recommended to use the TFTP method. This mode allows a server to deploy firmware updating and setting up on the ATAs in the network. Note This method is recommended when installing and setting up more than 10 units. Installing the TFTP server You first have to install a TFTP server. · If you already have an existing TFTP server, you can use it to remotely deploy the settings of your ATA units. · If you do not have a TFTP server, you have to install one in your network before continuing. Creating CLI command files After installing your TFTP server, you have to create CLI command files. The server will load them into the ATAs which will then run them. You have to create at least three files. The first, so-called, entry file specifies the name of the up-to-date firmware (which the ATAs will download if need be), and the name of the setup file applicable to all the ATAs (see next paragraph). The example below is the content of an entry file called "TFTPEntry.txt": fw_filename = S3-SIP-PIT-1-26-355-1019.bin common_config = common_parameters.txt 8 Sagem Fax ATA 101S Sagem_Fax_ATA101S.book Page 9 Jeudi, 21. février 2008 5:09 17 The example below is the content of the "common_parameters.txt" file (named as announced in the entry file). It defines "voipprovider.org" as domain, registrar and SIP proxy (for all the ATAs in the network): sip deregister all confighost vif0 -o -useproxy yes -h voipprovider.org -p 5060 -rtpmin 17000 -rtpmax 18000 -keepalive yes 20 configreg voipprovider.org configproxy voipprovider.org .. save This CLI command file must be in ASCII format. Note To create the ASCII file, contact Sagem Communications or your dealer to obtain the ATA's list of CLI commands. The third file contains the setup commands specific to a given ATA, for example SIP account settings if the infrastructure uses proxy, or if not, a routing table. The name of this file is suffixed by the MAC address of the ATA with which it is associated. There must be a corresponding file of this type for each ATA in your network. User guide 9 ENG The second file includes the setup commands common to the ATAs (for example, SIP proxy, coder used, fax protocol used). Sagem_Fax_ATA101S.book Page 10 Jeudi, 21. février 2008 5:09 17 For example, for the ATA with a MAC address 00:60:4c:99:99:99 there is a corresponding file "Sagem_00604c999999.txt", the content of which (below) specifies the settings of the SIP account (user name, password, etc.) likely to be used with this ATA: MACConfigversion = V1_01 sip/configphone 1 444719 -o -d Lecoq sip/configauth 1 444719 MySecretPassword save sip/register all These CLI command files must be in ASCII format. Note To create these ASCII files, co ...