Copyright Notice: No part of this installation guide may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc. Products and corporate names appearing in this guide may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners' benefit, without intent to infringe. Disclaimer: Specifications and information contained in this guide are furnished for informational use only and subject to change without notice, and should not be constructed as a commitment by ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this guide. With respect to the contents of this guide, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose. In no event shall ASRock, its directors, officers, employees, or agents be liable for any indirect, special, incidental, or consequential damages (including damages for loss of profits, loss of business, loss of data, interruption of business and the like), even if ASRock has been advised of the possibility of such damages arising from any defect or error in the guide or product. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CALIFORNIA, USA ONLY The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance controlled in Perchlorate Best Management Practices (BMP) regulations passed by the California Legislature. When you discard the Lithium battery in California, USA, please follow the related regulations in advance. "Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/perchlorate" ASRock Website: http://www.asrock.com Published March 2008 Copyright©2008 ASRock INC. All rights reserved. 1 ASRock K10N750SLI-WiFi Motherboard English Layout Motherboard Layout 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 PS2_USB_PW1 Jumper ATX Power Connector (ATXPWR1) ATX 12V Power Connector (ATX12V1) CPU Fan Connector (CPU_FAN1) AM2 940-Pin CPU Socket CPU Heatsink Retention Module 2 x 240-pin DDR2 DIMM Slots (Dual Channel A: DDRII_1, DDRII_2; Yellow) 2 x 240-pin DDR2 DIMM Slots (Dual Channel B: DDRII_3, DDRII_4; Orange) Primary IDE Connector (IDE1, Blue) NVIDIA nForce 750a SLI Chipset Clear CMOS Jumper (CLRCMOS1) SATAII Connector (SATAII_6 (PORT5)) SATAII Connector (SATAII_5 (PORT4)) SATAII Connector (SATAII_2 (PORT1)) SATAII Connector (SATAII_4 (PORT3)) SATAII Connector (SATAII_3 (PORT2)) SATAII Connector (SATAII_1 (PORT0)) USB 2.0 Header (USB8_9, Blue) USB 2.0 Header (USB6_7, Blue) 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 SPI BIOS Chip System Panel Header (PANEL1) Front Panel IEEE 1394 Header (FRONT_1394) Chassis Speaker Header (SPEAKER 1) Chassis Fan Connector (CHA_FAN1) Floppy Connector (FLOPPY1) DeskExpress Hot Plug Detection Header (IR1) HDMI_SPDIF Header (HDMI_SPDIF1) Front Panel Audio Header (HD_AUDIO1) Internal Audio Connector: CD1 (Black) PCI Slots (PCI1- 3) PCI Express x16 Slot (PCIE3, Blue) SLI/XFire Switch Card Retention Slot PCI Express x16 Slot (PCIE2, Green) PCI Express x1 Slot (PCIE1, White) WiFi/E Header (WIFI/E) SLI / XFIRE Power Connector COM Port Header (COM1) eSATAII Connector (eSATAII_TOP) English 2 ASRock K10N750SLI-WiFi Motherboard ASRock WiFi_SPDIF I/O 1 2 *3 4 5 6 7 **8 PS/2 Mouse Port (Green) IEEE 1394 Port LAN RJ-45 Port Side Speaker (Gray) Rear Speaker (Black) Central / Bass (Orange) Line In (Light Blue) Front Speaker (Lime) 9 10 11 12 13 14 15 16 Microphone (Pink) USB 2.0 Ports (USB01) USB 2.0 Ports (USB23) USB 2.0 Ports (USB45) eSATAII Port Optical SPDIF Out Port Coaxial SPDIF Out Port PS/2 Keyboard Port (Purple) * There are two LED next to the LAN port. Please refer to the table below for the LAN port LED indications. LAN Port LED Indications Status SPEED LED Description Activity/Link LED Status Description SPEED LED ACT/LINK LED Off Orange Green 10Mbps connection 100Mbps connection 1Gbps connection Off No link Orange Linked Blinking Data Activity LAN Port ** If you use 2-channel speaker, please connect the speaker's plug into "Front Speaker Jack". See the table below for connection details in accordance with the type of speaker you use. TABLE for Audio Output Connection Audio Output Channels Front Speaker Rear Speaker (No. 8) (No. 5) 2 V -4 V -6 V -8 V V Central / Bass (No. 6) --V V Side Speaker (No. 4) -V V V To enable Multi-Streaming function, you need to connect a front panel audio cable to the front panel audio header. After restarting your computer, you will find "Mixer" tool on your system. Please select "Mixer ToolBox" , click "Enable playback multi-streaming", and click "ok". Choose "2CH", "4CH", "6CH", or "8CH" and then you are allowed to select "Realtek HDA Primary output" to use Rear Speaker, Central/Bass, and Front Speaker, or select "Realtek HDA Audio 2nd output" to use front panel audio. 3 ASRock K10N750SLI-WiFi Motherboard English ASRock WiFi-802.11g Module Specifications ASRock WiFi-802.11g module is an easy-to-use wireless local area network (WLAN) adapter to support WiFi+AP function. With ASRock WiFi-802.11g module, you can easily create a wireless environment and enjoy the convenience of wireless network connectivity. Therefore, from anywhere within the signal range, you will be able to play LAN games, connect to the internet, access and share printers, and make Internet phone calls easily. Standard Data Rate Security Network Architecture Types Frequency Band Operating Range - IEEE 802.11g - 6, 9, 12, 18, 24, 36, 48, 54Mbps - Access Point mode (AP mode): WEP, WPA - Access Point mode (AP mode) - Station mode: Infrastructure mode and Ad-Hoc mode - 2.4~2.5GHz - Indoor: 80ft (30m) Outdoor: 200ft (60m) * The range varies in different environments - up to 16 stations Number of Connected Devices (AP Mode) Antenna LED Support OS Compatibility Software Support - ASRock WiFi-802.11g omni-directional antenna - Green data transmission (AIR) LED - Windows® XP / XP 64-bit / VistaTM / VistaTM 64-bit - Full compatible with IEEE 802.11g standard products - ASRock WiFi-802.11g Wizard English 4 If you want to start to use ASRock WiFi-802.11g module on this motherboard, please carefully read "ASRock WiFi-802.11g Module Operation Guide" in the package for the detailed introduction and operation procedures. You can also read the document in the following path of ASRock motherboard support CD: ..\ ASRock WiFi-802.11g \ Vista64_Vista_XP64_XP ASRock K10N750SLI-WiFi Motherboard 1. Introduction Thank you for purchasing ASRock K10N750SLI-WiFi motherboard, a reliable motherboard produced under ASRock's consistently stringent quality control. It delivers excellent performance with robust design conforming to ASRock's commitment to quality and endurance. This Quick Installation Guide contains introduction of the motherboard and step-bystep installation guide. More detailed information of the motherboard can be found in the user manual presented in the Support CD. Because the motherboard specifications and the BIOS software might be updated, the content of this manual will be subject to change without notice. In case any modifications of this manual occur, the updated version will be available on ASRock website without further notice. You may find the latest VGA cards and CPU support lists on ASRock website as well. ASRock website http://www.asrock.com If you require technical support related to this motherboard, please visit our website for specific information about the model you are using. www.asrock.com/support/index.asp 1.1 ackage P ack age Contents ASRock K10N750SLI-WiFi Motherboard (ATX Form Factor: 12.0-in x 8.8-in, 30.5 cm x 22.4 cm) ASRock K10N750SLI-WiFi Quick Installation Guide ASRock K10N750SLI-WiFi Support CD ASRock WiFi-802.11g Module Operation Guide Motherboard Accessories One ASRock SLI Bridge One ASRock SLI/XFire Switch Card One 80-conductor Ultra ATA 66/100/133 IDE Ribbon Cable One Ribbon Cable for a 3.5-in Floppy Drive Four Serial ATA (SATA) Data Cables (Optional) One Serial ATA (SATA) HDD Power Cable (Optional) One HDMI_SPDIF Cable (Optional) One "ASRock WiFi_SPDIF I/O" I/O Panel Shield WiFi Accessories One ASRock WiFi-802.11g Module One Antenna 5 ASRock K10N750SLI-WiFi Motherboard English 1.2 Specifications - ATX Form Factor: 12.0-in x 8.8-in, 30.5 cm x 22.4 cm - All Solid Capacitor design - Support for Socket AM2+ / AM2 processors: AMD PhenomTM FX / Phenom / Athlon 64 FX / Athlon 64 X2 Dual-Core / Athlon X2 Dual-Core / Athlon 64 / Sempron processor - AMD LIVE!TM Ready - Supports AMD's Cool `n' QuietTM Technology - FSB 2600 MHz (5.2 GT/s) (see CAUTION 1) - Supports Untied Overclocking Technology (see CAUTION 2) - Supports Hyper-Transport Technology - NVIDIA® nForce 750a SLI - Dual Channel DDR2 Memory Technology (see CAUTION 3) - 4 x DDR2 DIMM slots - Support DDR2 1066/800/667/533 non-ECC, un-buffered memory (see CAUTION 4) - Max. capacity of system memory: 8GB (see CAUTION 5) - 2 x PCI Express 2.0 x16 slots (green @ x16 mode, blue @ x8 mode) - 1 x PCI Express x1 slot - 3 x PCI slots - Supports NVIDIA® SLITM (see CAUTION 6) - Supports NVIDIA® Hybrid SLITM (see CAUTION 7) - 7.1 CH Windows® VistaTM Premium Level HD Audio with Content Protection - DAC with 110dB dynamic range (ALC890 Audio Codec) - DTS (Digital Theater Systems) support (see CAUTION 8) - Gigabit LAN 10/100/1000 Mb/s - Giga PHY Realtek RTL8211B - Supports Wake-On-LAN - ASRock WiFi-802.11g module - 54Mbps IEEE 802.11g / 11Mbps IEEE 802.11b - Supports Software Access Point mode (AP mode) and Station mode (Infrastructure mode and Ad-hoc mode) ASRock WiFi_SPDIF I/O - 1 x PS/2 Mouse Port - 1 x PS/2 Keyboard Port - 1 x Coaxial SPDIF Out Port - 1 x Optical SPDIF Out Port - 6 x Ready-to-Use USB 2.0 Ports - 1 x eSATAII Port ASRock K10N750SLI-WiFi Motherboard Platform CPU Chipset Memory Expansion Slot Audio LAN Wireless LAN English 6 Rear Panel I/O Connector BIOS Feature 7 ASRock K10N750SLI-WiFi Motherboard English Support CD Unique Feature - 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED LED) - 1 x IEEE 1394 Port - HD Audio Jack: Side Speaker/Rear Speaker/Central/Bass/ Line in/Front Speaker/Microphone (see CAUTION 9) - 6 x SATAII 3.0Gb/s connectors, support RAID (RAID 0, RAID 1, RAID 0+1, JBOD and RAID 5), NCQ, AHCI and "Hot Plug" functions (see CAUTION 10) - 1 x eSATAII 3.0Gb/s connector (shared with 1 SATAII connector) (see CAUTION 11) - 1 x ATA133 IDE connector (supports 2 x IDE devices) - 1 x Floppy connector - 1 x DeskExpress Hot Plug Detection header - 1 x COM port header - 1 x HDMI_SPDIF header - 1 x IEEE 1394 header - CPU/Chassis FAN connector - 24 pin ATX power connector - 8 pin 12V power connector - SLI/XFIRE power connector - CD in header - Front panel audio connector - 2 x USB 2.0 headers (support 4 USB 2.0 ports) (see CAUTION 12) - 1 x WiFi/E header (see CAUTION 13) - 8Mb AMI BIOS - AMI Legal BIOS - Supports "Plug and Play" - ACPI 1.1 Compliance Wake Up Events - Supports jumperfree - AMBIOS 2.3.1 Support - CPU, DRAM, NB, SB, VTT Voltage Multi-adjustment - Drivers, Utilities, AntiVirus Software (Trial Version) - ASRock OC Tuner (see CAUTION 14) - Intelligent Energy Saver (see CAUTION 15) - Hybrid Booster: - CPU Frequency Stepless Control (see CAUTION 16) - ASRock U-COP (see CAUTION 17) - Boot Failure Guard (B.F.G.) - ASRock AM2 Boost: ASRock Patented Technology to boost memory performance up to 12.5% (see CAUTION 18) Hardware Monitor OS Certifications - CPU Temperature Sensing - Chassis Temperature Sensing - CPU Fan Tachometer - Chassis Fan Tachometer - CPU Quiet Fan - Voltage Monitoring: +12V, +5V, +3.3V, CPU Vcore - Microsoft® Windows® XP / XP Media Center / XP 64-bit / VistaTM / VistaTM 64-bit compliant - FCC, CE, WHQL * For detailed product information, please visit our website: http://www.asrock.com WARNING Please realize that there is a certain risk involved with overclocking, including adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using the third-party overclocking tools. Overclocking may affect your system stability, or even cause damage to the components and devices of your system. It should be done at your own risk and expense. We are not responsible for possible damage caused by overclocking. CAUTION! 1. If you install AM2 CPU on this motherbord, the system bus speed will be HT1.0 (2000 MT/s). If you install AM2+ CPU on this motherbord, the system bus speed will be HT3.0 (up to 5200 MT/s), and the HT Link frequenc ...